The Audio-Technica AT2020 is a cost effective studio condenser microphone intended for vocal capturing in project and professional studio environments. The capsule features a 16mm low-mass, side-address diaphragm with a cardioid polar pattern. The cardioid pattern is effective in rejecting ambiance and noise at the off-axis sections of the microphone capsule. A linear frequency response of 20Hz to 20kHz enables the flexibility to accurately reproduce signals from any source. High SPL handling and wide dynamic range allow the AT2020 to capture loud signals with minimal noise and distortion. The microphone includes a pivoting, threaded stand mount for accurate positioning.
Cardioid Condenser Element:
The 16mm low-mass diaphragm features a cardioid polar pattern. The cardioid pattern effectively minimizes ambient room noise, noise from adjacent rooms and minimizes feed-back caused by monitors.
Wide Frequency Response:
The wide frequency response of 20Hz to 20kHz allows accurate signal reproduction from any source.
Wide Dynamic Range & Transient Response:
The AT2020 boasts a wide dynamic range of 124dB (typical). The capsule reproduces loud signals and transients with minimal noise and peak distortion.
| General |
| Transducer |
Fixed-charge back plate permanently polarized condenser |
| Polar Pattern |
Cardioid |
| Frequency Response |
20 Hz - 20 kHz |
| Dynamic Range (Typical) |
124dB, 1 kHz @ Max SPL |
| Signal-to-noise Ratio |
74dB, 1kHz @ 1 Pa |
| Maximum Input Sound Level |
144dB SPL, 1kHz @ Max SPL |
| Power Requirements |
48V DC, 2 mA typical |
| Output impedance |
100 ohms |
| Output connectors |
3-pin XLR male |
| Pad |
None |
| Low Frequency Roll-Off |
None |
| Dimensions (LxD) |
6.38" x 2.05" |
| Weight |
12.1oz |
Your price includes:
- Audio-Technica AT2020 - Cardioid Condenser Recording Microphone
-
Pivoting Stand Mount 5/8" - 27 threaded
-
Soft Protective Pouch
-
1 Year Warranty